Liquid Detected In Lightning Connector – Best Issue Fixing In 2023

The iPhone isn’t able to charge through an electrical connection. It’s a pity particularly if you’re trying to get your device charged immediately. You’re one step away from getting the issue solved since you’ve come across this article. This guide will help you figure out how you can do Liquid Detected In Lightning Connector on your iPhone.

What the liquid detected alert means?

First, you could be thinking, “What does liquid detected in lightning connector mean?” It is also possible that you are thinking whether there is Liquid Detected, or not, since your iPhone was not wet last time. Let’s first address these questions.

“iPhone liquid detected” or “liquid detect in lightning connector” alert appears because liquid or moisture has been detected present in the Apple gadget’s lightning connector. It could also indicate that the connector of your charging cable is damp.

Sometimes, the notice may be an error or a mistake. The charging connector or port isn’t dry. There may be an unclean substance in the port or connector, an iPhone software issue as well as Liquid Detected Contact Indicator (LCI) damages. These can lead to false or incorrect detections. Software issues and port blockages can be fixed easily However, this isn’t the case with the LCI.

If you’re still not aware you’re missing out. LCI can be found located on the left or middle-left side of the new iPhones when facing your face (see iPhone 13 LCI sample image above). The component changes from white or silver to red after being it gets wet. If it’s red, even if your iPhone did not become wet, then it may be in need of repair.

What not to do?

If you’ve put the screen of your iPhone to water and you see the alert pop up and you are tempted to resolve the issue fast. However, there are some items you should not do in the event that you see the “Liquid Detected in Lightning Connector” alert pops up in your iPhone.

One thing to remember is that you should not press the emergency override button in the alert. The risk of damaging your iPhone and cause more issues over time. Also, don’t try drying the connector with an external source of heat, such as the use of a heating device or hair dryer. The heat can damage the battery, or cause corrosion. Don’t even think about blowing the water out with compressor air or your mouth, since you’re more likely to force the water deeper into your phone.

Contrary to what some might suggest that you shouldn’t put cotton sponges or paper towels into the connector too. Although these are able to absorb water, you’ll likely cause damage to pins or make other particles aplenty into the phone.

What to do if liquid detected in lightning connector?

If there’s moisture in the air or not, you could explore these options to solve the problem. Before you begin these solutions, do not forget to hit the “Dismiss” button on the pop-up warning. Unplug the iPhone and chargers as well.

1. Dry your iPhone

iPhones, beginning with 7 series to iPhone 7 series, have IP67 or IP68 ratings to indicate water resistance. However, these ratings don’t mean the iPhone will withstand damage from water that is beyond its limits. Therefore, you’ll need the ability to clean your iPhone liquid detect in lightning connector. The long-term exposure to moisture could result in the corrosion of the pins within the connector.

The safest and most effective method to remove water from the iPhone charge port to wipe it clean and then letting it dry. Clean a cloth to do this. Make sure that nothing is blocking the surface so that air can be able to pass through it. Drying can take anywhere from between 30 and a full day depending on how bad the accumulation of moisture is.

It’s a lengthy process however it’s wiser trying rapid hacks that don’t work. For instance, you could leave the iPhone in a rice grain basin. This is a cool idea however, it could lead to having your iPhone ports clogged with particles.

2. Dry or replace your charging connector

Like we said, moisture could be found in the iPhone charger port. But, to be sure Dry your charging cable simultaneously. You could use a different piece of clean cloth to cover it, and let the air dry it also.

If drying is a hassle for you, there’s no reason to be concerned. The charging accessories are much less expensive than iPhones and you can always opt to switch your charger. In the end, it’s dangerous to plug the cord into the same place if you’re not certain it hasn’t been damaged by water.

3. Look for and remove debris too

What happens if the alarm appears to be false? What’s the most common reason for your iPhone claims that there is Liquid Detected found inside the lightning connector it isn’t? It could be because of dust, dirt or even dust or. All of them could stop charging or cause a false notification.

Therefore, look into the charging port on your iPhone and cable’s plug to look for any dirt. Make use of compressed air to blow the particles away. Take care since the ports contain sensitive components.

4. Get available IOS update

Another reason that causes the iPhone liquid detected is a software glitch. Therefore, whenever you see an iOS update, download it. The update could contain the fix you’ve been in search of, and stop the false “liquid detect in lightning connector” warnings from popping up.

Here’s how you can switch to the most recent iPhone OS:

• Make use of your iPhone to browse the web.
• Open the Settings app on your device.
• On the Settings interface On the settings interface, click General.
• Tap the menu to open it and then press Software Update..
• Choose the OS version that you would like to update in the event that there are more than one in the pipeline.

To avoid the manual process again you’ll be able to change the frequency of your OS updates to be automatic. In on the Software Update menu, you can go to Automatic Updates. Automated Updates option. After that, use the sliders to download and installing updates to software. You can choose for the process of downloading you’d like to automate.

5. Use a wireless charging pad or stand

If the iPhone liquid detected not correctly in the Lightning connector it is possible to use the lightning connector to charge your iPhone without the cable. iPhone 8 and newer models are compatible with the wireless charging pad. You can use wireless charging while you wait and then wait for the iPhone charger port, or LCI to function as it should. Make use of a wireless charger made by Apple or a trusted brand to avoid any further problems caused by counterfeit devices.

6. Ask apple for assistance

Contact Apple Support if the alert for iPhone liquid detect in lightning connector does not disappear, or when repairs are required. It’s easy to do this through this Apple Support web page which allows you to get professional advice or assistance quickly. You can also download Apple Support on your smartphone to get help. Apple Support app to receive assistance. Be aware this: the 1-year Apple warranty doesn’t include Liquid Detected damage. Thus, you must be prepared to pay a bit for repairs if needed.

What to do if there is no water?

Sometimes it happens that you may notice that “Liquid Detect in Lightning Connector” alert appears even though your phone hasn’t been exposed or water. This irritating and stressful problem is just one of the numerous iPhone problems that are popping up in the recent iOS updates.

Although you won’t be at the possibility of harming your iPhone by keeping the lightning adapter connected, the alarm is still a bit annoying. The iPhone will not charge and the device won’t function even. There are couple of solutions to that iPhone error. A few of them can fix the iPhone problem completely.

Force restart the phone

As with all technical issues and glitches, often one of the simplest solutions is turning the phone off and on again. Depending on the iPhone mode you’re using and the method to force restart may differ. To determine the iPhone model you own, 

If you own the iPhone 8, the second-generation iPhone SE, or an iPhone model that has Face ID, you can follow these easy steps:

• Press and release quickly the volume button.
• Press and release quickly the button to turn down the volume.
• Hold and press the power/side button.
• Press the power button until the Apple logo appears.

Force restarting the iPhone 7:

• Hold and press the volume button and the power/side buttons together.
• Only press the button after the Apple logo appears.

If you have an older device, such as or an iPhone 6, 6S, or the first-generation SE take the steps below to restart your phone your phone:

• Hold and press the home button on the lower part of the phone as well as the wake or sleep button at the same time.
• Release the buttons once the Apple logo appears.

When your iPhone is to the back-up mode, then you will not receive the annoying alert. However, if the warning persists, it could be a problem with the lightning connector. At times, an alert will appear when something dry is preventing the connector from functioning in a proper manner.

Utilize a flashlight to examine the port for lightning. If you notice any dirt or dust in the port then it’s probably an opportunity to clean your iPhone. Use compressed air and then gently blow away any dirt. Your iPhone should be as good like new, and you won’t get any unpleasant alerts for iPhone liquid detected.

Select emergency override

If your iPhone isn’t exposed to Liquid Detected or water and there’s not any dust on the connector, you are able to be sure to tap the switch for emergency bypass. The button will disable the alarm and allow the phone to return to normal operation. After you have pressed the emergency button, you are able to recharge your iPhone or utilize any other lightning device. Although this won’t solve the issue however, you’ll be able to be able to continue using your iPhone. But until the issue is resolved then you’ll likely remain to receive this annoying alert.

Ensure the phone is up to date

The majority of bugs and iPhone issues are fixed with smaller iOS updates. Although there is a “Liquid Detect in Lightning Connector” alert issue was recently discovered as a result of software updates Apple most likely release a fix in the near future.

What is the best way to upgrade your iPhone? Luckily, regardless of the iPhone model you own the procedure is identical. Before you update, it’s best practice to backup your iPhone in case of data loss. There are many methods to do this: making use of iCloud as well as your Mac or PC.

Backing up iPhone

For an entire guide on backing to your iPhone by using iCloud If you have an Mac that runs macOS Catalina, iPhone liquid detected, follow these steps to backup your iPhone:

• Open the Window of Finder
• Connect your iPhone by using USB Cable to the Lightning Connector
• Click “emergency override” if the alert is displayed.
• Enter your password.
• Click to trust computer
• Open your iPhone’s sidebar of the Finder.
• Go to Back Ups and then click to Back Up Now

The procedure is similar for a PC however, it is done inside iTunes in place of Finder.

Updating iPhone

When your iPhone is fully backed up, it is safe to install any updates. To make sure you update your iPhone Follow these steps:

• Connect the phone to an electrical source
• Press Emergency Reset when the alert is displayed.
• Navigate to the Settings app
• Tap General
• Click Software Update
• Download and install right now to see if there is an update available

After the update has been completed there is a good chance that the problem will be solved.

Reset to factory settings

In the event that you’ve attempted everything it’s possible in order to set your iPhone to default settings. This is an extreme step but it’s one that could solve a variety of iPhone issues, such as this gruelling bug.

This method erases all of your iPhone’s data as well as preferred settings that include privacy networks, location, and network settings. It will erase all your iPhone is completely erased and will be restored to the exact state it was in when you bought a new iPhone from the box. If this isn’t working and you don’t wish to lose any information Backup your iPhone. So you can quickly repair your iPhone.

For resetting your iPhone Follow these simple steps:

• Go to the Settings app
• Navigate to General
• Scroll to the bottom and click Transfer or Reset iPhone.
• Choose Erase all Content and Settings
• Follow the steps

After your iPhone is back up and running the system, it can be set up to function as a brand new iPhone or backup. The issue should no longer be a problem for either you, or the iPhone as well as its accessories. In the event that everything other options fail, you might have to take your iPhone to the closest Apple Store. You should not alter the settings over the procedure that was discussed earlier. If you try opening the phone or alter an lightning plug, then you may harm your phone and invalidate the warranty.

Additionally, if you find that your iPhone has become wet and the methods above do not work, you should visit the Apple store. However, Apple’s one-year limited Warranty doesn’t cover liquids damages from water or Liquid Detected. But Apple’s service technicians can repair the phone and then return it without any problems.

Conclusion

Finding iPhone liquid detected or receiving messages that read “liquid detect in lightning connector” for no reason is an enormous amount of hassle for users. We suggest using the solutions we have provided in this article. You can make use of Tenorshare ReiBoot in order to restore your iPhone securely. There are no problems caused by data loss.

There is no need to worry about messages disrupting the experience on your smartphone. An easy solution is implemented using Tenor share ReiBoot to get rid of problems caused by iPhone liquid detect in lightning connector.